(495) 744-00-52

 
Subscription
your e-mail
Our awards
Something to be proud of

Section has not been found.

KLOD-01 – fireretardant impregnation

1. FIELD OF APPLICATION AND PROPERTIES

Fire retardant impregnation "Klod-01"representsa water solution ofnon-organic salts, used for treatment of wood, wooden materials andplywoods, operated inside of buildings and premises. Fire reatardant impregnation "Klod-01" consists of 2 solutions: "Klod-01-1" and "Klod-01-2".

2. NORMATIVE AND TECHNICAL REQUIREMENTS

Fire retardant impregnation "Klod-01" corresponds to I group of fire-proof efficiency according to the fire safety requirements stated inNPB 251-98 "Fire-proof materials for wood and wooden based materials. General requirements. Method of testing."

Certificate of fire safety No. SSPB.RU.OP.002.B.02055

Certificate of conformityNo. ROSS RU.BB05.N00949

Hygiene certificateNo.77.01.12.238.P.042877.10.05

3. TECHNICAL SPECIFICATION

Klod-01-1

Klod-01-2

Color of solution

transparent

transparent

pH

2,2

7,8

Density, not more,kg/m3

1,1

1,2

Total consumption of solutions, not less, g/m2

550

550

4. SURFACE TREATMENT

Coating should be applied on clean and dry surface.Dust and dirt should be removed from the surface by means of wet rags, grease and oil stains can be removed with solvent (solvent 646 is recommended). If application of solvent is not possible use the washing agents.

5. APPLICATION

Application conditions:

Ambient temperature - not less than +5 °;

Relative air humidity - not more than85 %;

Humidity of wood - not more than 15%.

Application modes:

Application is performedby means of high pressure machines, spray gun or brushin three passes: first - application of "Klod-01-1" with consumption250 g/m2. "Klod-01-2" is applied 2-4 hours later in two passes with consumption 300 g/m2.

Cleaning of tools:

Wash the tools with water immediately after end of work.

6. OPERATING CONDITIONS

Operation of coating in enclosed premises without direct ingress of drop moisture.

Operation time of coating based on "Klod-01" not less than 3 years.

7. PACKAGING AND STORING

Fire retardant impregnation "Klod-01" is supplied in packaging of 10 l. and 20 l.

Shelf lifein the packaging of manufacturer - 1 year in dry place at temperature above+50.

ATTIK fire- bio retardant impregnating composition
TU 2389-021-40366225-00

1. FIELD OF APPLICATION AND PROPERTIES

Fire- bio retardant impregnating composition "Attik"representsasolution ofnon-toxic non-organic salts. Coating based on "Attik" is used for protection of wooden constructions and wooden based materials, operated inside of the buildings and premises, from ignition and spreading of flame.

2. NORMATIVE AND TECHNICAL REQUIREMENTS

Fire retardant impregnating solution "Attik" corresponds to I group of fire-proof efficiency according to the fire safety requirements stated inNPB 251-98 "Fire-proof materials for wood and wooden based materials. General requirements. Method of testing." and GOST 16363-98 "Fire-proofing means for wood. Methods of determination of fire-proof properties".

Certificate of fire safety SSPB.RU.OP.063.B.00003

Certificate of conformity SSAQ 006.1.4.284

Hygiene certificate 77.01.03.238.P.20016.09.4

3. TECHNICAL SPECIFICATION

Color

transparent

pH

7,5-8,0

Consumption for I group, not less,g/m2

750

Consumption for I group, not less,g/m2

400

4. SURFACE TREATMENT

Coating should be applied on clean and dry surface.Dust and dirt should be removed from the surface by means of wet rags, grease and oil stains can be removed with solvent (solvent 646 is recommended). If humidity is high - use seasoning or force drying (using heating machines).

5. APPLICATION

Application conditions:

Ambient temperature - not less than +5 ;

Relative air humidity - not more than85 %;

Humidity of wood - not more than 15%.

Application modes:

Application is performedmechanically by means of machines or manually.Application is performed layer-by-layer. Apply 300-400 g/m2 in one pass. Interlayer curing - 2-4 hours depending on temperature and humidity. Disassembled constructions can be coated using immersion method. Immers construction elements into a bath withimpregnation, heated up to +60 C, and keep elements inside within 20-30 minutes. Injection depth makes 2-8 mm, depending on the mode of application.

Cleaning of tools:

Wash the tools with water immediately after end of work.

6. OPERATING CONDITIONS


Operation of coating in enclosed premises without direct ingress of drop moisture.

Operation time of coating is not less than 3 years.

7. PACKAGING AND STORING


Fire- bio retardant impregnation "Attik" is supplied in packaging of 10 l. and 20 l. Product also can be delivered in dry form.
Shelf lifein the packaging of manufacturer - 1 year in dry place at temperature above+50.

News
 
Customer Feedback

Section has not been found.

 
 
© 1991-2021 Krilak Association
Moscow,
st. 2nd Institute, 6
E-mail: info
(495) 744-00-52