Sliding fire resistant gates (single/ double)
Basic model:
Leaf (composed of modular sections):
framework of the leaf made of profile tube 50x50 mm with steel sheet casing.
Filling: mineral wool plate, fire retardant composition.
Bracket-type handle.
Finish: polyurethane paints of RAL9002 colors.
Components:
Guiding beam; guiding rollers;
Holder for rollers’ fixing.
Device for rolling back prevention.
Protective cover.
Labyrinth sealing.
Set of mounting anchors.
Handle.
Sizes according to the Customers requirements.
Optional features:
-
Electric drive for door opening/ closing
-
Corrosion protection: “liquid zinc” coating.
-
Wicket: metal fire resistant door 900 x 2000 mm with mortise lock and press handles.
-
Door closer for a wicket.
-
Finish: any color from the RAL catalogue.
-
Decorative coating with veneer sheet, fiberboard or plastic.
Folding fire resistant gates (double)
Basic model:
Leaf:
framework of the leaf made of profile tube 50x50 mm with steel sheet casing.
Filling: mineral wool plate, fire retardant composition.
Total leaf thickness is 55 mm.
Three hinges on bearings.
Detachment preventive girth rails.
Finish: polyurethane paints of RAL9002 colors.
Frame:
framework of profile tube 80 x 40 mm.
Platband.
Total thickness is 82 mm.
Edge (40 mm).
Mounting holes and loops for anchoring.
Heat expanding sealing protecting from hot smoke; sealing from cold smoke.
Set of mounting anchors.
Finish: polyurethane paints of RAL9002 colors.
Lock and handle:
Mortise lock with nab. Press handle on plate (color: black). Set of keys with euro-cylinder.
Two plated vertical locking bars on passive leaf.
Optional features:
-
Wicket: metal fire resistant door 900 x 2000 mm with mortise lock and press handles.
-
Hatch 200 x 200 mm.
-
Electric drive for door opening/ closing.
-
Corrosion protection: “liquid zinc” coating.
-
Front frame (without a platband).
-
Leaf with four hinges on bearings.
-
Door closer for a wicket.
-
Lock with three-points locking-up.
-
Bracket-type handle.
-
Rim lock.
-
Electromagnetic device for keeping the door open.
-
Impingement plate of galvanized or stainless steel on the bottom part of the leaf.
-
Finish: any color from the RAL catalogue.
-
Decorative coating with veneer sheet, fiberboard or plastic.
-
Accessories of chrome-plated or stainless steel.
-
Preparation of the gates for installation of access control systems.
-
Gates’ size according to Customers’ requirements.
|